logo
深圳市耐可利刀具有限公司
company news

News

Contact Us

Contacts:

Phone:13924599056

Tel:

Fax:

E-mail:sales@sznkl.com

Address:SHENZHEN NAIKELI TOOL CO.,LIMITED

company newsHome > News > company news
It reminds you that you need to pay attention when cutting blades.
Publisher: Nikeli Tools     Release Time:2018-08-30

It reminds you that you need to pay attention when cutting blades.


The machine is as important as the engine of a car. Once you are not good at it, it will make trouble for you like a child. So we will know in detail what we should pay attention to in installation and use. Item.


Before work, conscientiously make the shears run empty before trial run, should be tried manually, in order to avoid the use of the machine in the process of failure, to confirm some normal before starting the machine. Then there is a hydraulic device, should check the oil storage tank adequacy. After starting the oil pump, check the valve and pipeline for leakage. Pressure should be within the normal range, open the exhaust valve to release the air in the system.


In the course of using, it is forbidden to cut laminated sheets, trim the edges of wool-edged sheets, and cut narrow sheets and short materials that are not compacted. The gap between the knife plates shall be adjusted according to the thickness of the sheet, but not greater than 1/30 of the plate. The blades of the upper and lower shears should be kept in parallel. After adjustment, they should be checked by manual turning to avoid accidents.